USBF TV 6 G

ROHS $0.1-*"/5 N & BZ USBF TV (USB-A) 64#
$POOFDUJPO
4ZTUFN
GPS
)BSTI
&OWJSPONFOU
64#
$POOFDU With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. /P
IB[BSEPVT
POGJFME
DBCMJOH
BOE
HSPVOEJOH This metallic plug is connected into a receptacle, using a Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. Data Transmission USB Specification 2.0 Data Rate: Up to 480 Mb/s for High Speed USB MAIN CHARACTERISTICS n Sealed against fluids and dusts (IP68) n Shock, Vibration and Traction resistant n No cabling operation in field and no tools required n Improved EMI protection n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device n 2 mechanical Coding / Polarization possibilities by the user (receptacle insert rotation) n USBF TV plug retention in the receptacle: 100 N in the axis n Mating cycles: 500 to 1500 USBF TV Environmental Protection n Sealing (when mated): IP68 (Temporary immersion) n Salt Spray: 48 h with Nickel plating > 500 h with Olive Drab Cadmium 1000 h with marine bronze shell n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102 n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s n Shocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair) n Humidity: 21 days, 43°C, 98% humidity n Temperature Range: - 40°C / +85°C 1BSU
/VNCFS
$PEF 4FSJFT 64#
'JFME
57 64#'
57 2 4IFMM
5ZQF 6: Plug 2: Square flange receptacle 2PE: Square flange receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 2PEM: Square flange receptacle with backshell + metal gland (only for back termination type 2 = Solder) 7: Jam nut receptacle 7PE: Jam nut receptacle with metal backshell (type 1) & with metal backshell + plastic gland (type 2) 7PEM: Jam nut receptacle with backshell + metal gland (only for back termination type 2 = Solder) #BDL
5FSNJOBUJPOT (Receptacles only) 1: Female USB-A 2: Solder (4 tinned holes) 4IFMMT
.BUFSJBM

'JOJTI / Aluminium shell - Nickel plating - ROHS compliant ( Aluminium shell - Olive Drab Cadmium plating BZ: Marine bronze shell - ROHS compliant Examples: 1 ( Amphenol Applications n Embedded Computers n Data Acquisition and transmission in harsh environment n Railways n Battelfield Communication Systems n Navy Systems - Olive Drab Cadmium Plug: USBF TV 6G - Olive Drab Cadmium Square Flange Receptacle, USB-A back terminat°: USBF TV 21G - Olive Drab Cadmium Jam Nut Receptacle, USB-A receptacle back terminat°: USBF TV 71G - Nickel Jam Nut Receptacle, solder termination: USBF TV 72N informations & contacts:
XXXVTCGJFMEDPN
t
DPOUBDU!VTCGJFMEDPN 25 1MVH
n Shell type 6 USBF TV 6 X 3FDFQUBDMFT
n Square flange receptacle 4 mounting holes: Shell type 2 USBF TV 2 XX Panel Drilling USBF TV 7 XX Panel Drilling n Jam nut receptacle Hexagonal Nut mounting: Shell type 7 86.9 [3.422] USBF TV n Receptacles with backshell: Shell type 2PE and 7PE Backshell used with back termination type 1: USB A receptacle (Not sealed) Same panel drilling as USBFTV 2xx USBF TV 2PE(M) / 7PE(M)-2 USBF TV 2PE / 7PE-1 Amphenol Backshell used with back termination type 2: Solder (Sealed – IP68) Panel Drilling (for type 2 only) #BDL
5FSNJOBUJPOT
Type 1: Female USB-A Type 2: Solder 4 Tinned holes to solder your cable View of the PCB of the Type 2 version with 4 tinned holes for solder termination 26 informations & contacts:
XXXVTCGJFMEDPN
t
DPOUBDU!VTCGJFMEDPN "TTFNCMZ
*OTUSVDUJPOT Can be used with most the USB cordset brands: No tools required! 1MVH
"TTFNCMZ
1. Only if you need a full sealing (IP68): Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure connection sealing 1 2 3 4 5 6 3. Insert the USB cordset into the metallic backshell 4. Insert the retention spacer laterally to the cable (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 5. Insert the friction ring laterally to the cable 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Note at this step, the main key is used for polarization. ."*/
,&: 7. Screw the backshell on the plug body. A wrench can be necessary to fully tighten it, and the connection to the receptacle can help *.1035"/5
/05& The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (fig. 2) B C 3FDFQUBDMF
"TTFNCMZ USBF TV Insert the USB module from the rear. Reference is main key. Beware to have a coding compatible with the coding you used for the plug: on front view, the white shapes in the USBs must be on the same side. To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. "DDFTTPSJFT n
.FUBMMJD
$BQT 2 ( 4IFMMT
.BUFSJBM

'JOJTI / Aluminium shell - Nickel - ROHS compliant ( Aluminium shell - Olive Drab Cadmium BZ: Marine bronze shell - ROHS compliant n Panel Gasket for square flange receptacle (Thickness: 0,8 mm [.031]): JE15 Amphenol 64#'
57$ $POOFDUPS
5ZQF 6: Plug 2: Square Flange Receptacle 7: Jam Nut Receptacle n Receptacle Insert removal tool: USBF ODE informations & contacts:
XXXVTCGJFMEDPN
t
DPOUBDU!VTCGJFMEDPN 27